Automated Gates in Sandbanks & Canford Cliffs: 2026 Guide
Updated: 13 hours ago
Drive along Shore Road or up through Canford Cliffs on a weekday morning and you'll notice how many driveways now sit behind a set of electric gates. Round here it's rarely about showing off. It's about security on plots that back onto public footpaths and the chines, keeping the drive clear on a hot Saturday when half of Dorset is looking for beach parking, and not having to get out of the car in a sideways Poole Bay squall. We've fitted automated gates across BH13 and BH14 for a good few years now, and the peninsula throws up problems you simply don't get inland. This guide covers what works here, what it costs in 2026, and the planning and safety rules that catch people out.

Swing or sliding? On the peninsula it's usually decided for you
Swing gates are the classic look and the cheaper option. They need clear space to open inwards, a drive that's reasonably level for the first three or four metres, and piers or posts strong enough to carry a leaf that can weigh 80kg or more once the motor arm is hung off it. Plenty of Canford Cliffs plots have that space. A lot of Sandbanks ones don't. Peninsula plots are long and narrow, drives often drop away from the road, and the cars parked on them are rarely small.
That's why so much of our gate work in Sandbanks ends up being a cantilever sliding gate. It runs on rollers set back from the opening, so nothing crosses the driveway surface, nothing has to clear a slope, and the gate can be as wide as the opening allows. It costs more up front because of the counterbalance tail and the concrete foundation it sits on, but it's the right answer on a tight plot. We'll say so at the survey rather than trying to make a pair of swing gates work where they shouldn't.
One thing that isn't negotiable: automated gates have to open inwards onto your property. A gate that swings out over the pavement won't meet the safety standard and won't get past planning, so if your existing manual gates open outwards, that's the first thing that changes.
Salt air changes the whole spec
This is the bit that installers from further inland tend to get wrong. Sandbanks, Canford Cliffs and the seafront at Branksome Chine sit in salt-laden air for most of the year. A mild steel gate that would last twenty years in Wimborne starts blooming rust at the welds within a couple of winters here unless it's hot-dip galvanised and powder coated, and even then it's usually the fixings that let it down first.
Our default for the peninsula is marine-grade aluminium with a polyester powder coat, stainless steel hinges and fixings, and motors rated IP54 or better with the control board in a sealed enclosure set well above ground level. Underground motors give the cleanest look, but they need a properly drained foundation box, and on a low-lying plot near the harbour we'd rather fit a good above-ground arm and tuck it behind the pier than leave a hydraulic motor sitting in seawater every spring tide.
Wind matters too. A solid-boarded gate on an exposed Shore Road frontage acts like a sail, and an under-sized motor will stall or strip its gears in a south-westerly. We size the motor for the wind load, not just the gate weight, and on the most exposed plots we'll suggest a slatted or louvred design that lets the wind through without giving up privacy. That's the kind of detail we build into all our fencing and automated gate work along the coast.
What automated gates cost in Sandbanks and Canford Cliffs in 2026
We've priced these against current south-coast rates for this kind of work, and the figures include our margin, so they're what a Complete Builds quote will actually look like rather than a bare trade cost with the labour missing. Every job still gets a proper survey before we put a number on paper.
Pair of automated aluminium swing gates, supplied and fitted: £7,000 to £12,000. A simpler softwood pair on a straightforward drive can start from around £6,000.
Cantilever sliding gate up to about 4m, automated: £6,500 to £12,000. Wider openings, bespoke designs and heavier boards push that to £13,000 to £18,000.
Underground motors instead of above-ground arms: add £600 to £1,800.
Video intercom or app control so you can let a delivery in from the beach: £600 to £1,800 depending on the system.
Dedicated power supply from your consumer unit, ducted, terminated and certified: £750 to £1,500 depending on the length of the run.
Annual service and force test once it's in: £180 to £360.
The items that most often surprise people at quote stage are new piers and the electrical run. Building a pair of piers in matching brick or rendered blockwork is a job in its own right, foundations and all, and if the consumer unit is at the back of the house the cable has to get to the front somehow. We do the electrical side in-house, so the supply, the certification and the gate commissioning come from one team rather than three trades pointing at each other.
On timing, a bespoke aluminium gate is typically four to eight weeks from order to delivery, and we're usually on site for two to four days: one for groundwork and ducting, then the fit, the wiring and the commissioning.
Planning, safety and the paperwork you should be handed
If the gate sits next to a highway, which includes the footpath and verge, and it's over one metre high, it needs planning permission. Anywhere else the limit is two metres. Most Sandbanks frontages on Panorama Road and Banks Road sit right on the road, so the majority of gates we fit there go through planning with BCP Council, and we handle the application as part of the job. Parts of Branksome Park sit in a conservation area with tree preservation orders on the pines, which affects where we can dig foundations and how close to the roots we can trench.
Powered gates also have to comply with BS EN 12453. In plain terms that means photocells across the opening, safety edges on the leading and trailing edges, closing force limited to safe levels, and all of it tested and written down. When we hand over you get the electrical certificate, the commissioning record and the force-test results, and we'll book the annual force test in the diary before we leave. A gate that's been fitted without any of that isn't just a compliance problem; it's the thing that goes wrong on a windy night with a car half-way through it.
Related reading
Talk to us about gates on the peninsula
If you're in Sandbanks, Canford Cliffs, Lilliput or Branksome Park and you're weighing up automated gates, the most useful first step is a site visit. We'll measure the opening, check the levels and the piers, look at where the power will come from and tell you straight whether it's a swing job or a slider. Book a gate survey with Complete Builds and we'll come out to the plot, usually within the week.




Comments